Ethernet eth0: MAC address 0e:00:00:ea:18:f0 IP: 10.11.200.34/255.255.0.0, Gateway: 10.11.1.1 Default server: 10.11.11.83, DNS server IP: 10.11.11.14 RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version v2_0 - built 13:38:26, Aug 11 2006 Platform: Cirrus Logic EDB9307 Board (ARM920T) Rev A Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x04000000, [0x000444e8-0x03fbc000] available FLASH: 0x60000000 - 0x62000000, 128 blocks of 0x00040000 bytes each. == Executing boot script in 1.000 seconds - enter ^C to abort RedBoot> fis unlock -f 0x60000000 -l 0x1ffffff ... Unlock from 0x60000000-0x61ffffff: ................................................................................................................................ RedBoot> mfill -b 0x1000000 -l 0x8000 -p 0x0 RedBoot> fis load update_script ** Warning - checksum failure. stored: 0x8f6d3d85, computed: 0x00000000 RedBoot> script -b 0x1000000 RedBoot> fis load zImage ** Warning - checksum failure. stored: 0x52bbd379, computed: 0xeaeebcfe RedBoot> exec Using base address 0x00080000 and length 0x00180000 Uncompressing Linux..................................................... done, booting the kernel. Linux version 2.4.21-rmk1-crus1.4.5 (builder@build1-rel.control4.com) (gcc version 3.3) #b1.6.0.10-mt2 Tue Jan 13 17:51:45 MST 2009 CPU: Arm920Tid(wb) revision 0 Machine: edb9307 Security risk: creating user accessible mapping for 0x80000000 at 0xff000000 On node 0 totalpages: 16384 zone(0): 24576 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock4 ro Console: colour dummy device 80x30 Calibrating delay loop... 99.73 BogoMIPS Memory: 32MB 32MB = 64MB total Memory: 62932KB available (1337K code, 378K data, 132K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module version 2.8.7 (20040611) i2c-dev.o: i2c /dev entries driver module version 2.8.7 (20040611) i2c-proc.o version 2.8.7 (20040611) ttyAM0 at MMIO 0xff8c0000 (irq = 52) is a AMBA ttyAM1 at MMIO 0xff8d0000 (irq = 54) is a AMBA ttyAM2 at MMIO 0xff8e0000 (irq = 55) is a AMBA Enabling backlight, power supply, and LCD screen for NEC and DT Enabling backlight, power supply, and LCD screen for NEC and DT Console: switching to colour frame buffer device 40x30 I2C: DS1338 RTC driver successfully loaded EP93xx touchscreen driver configured for 4-wire operation ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize SCSI subsystem driver Revision: 1.00 EDB9307-NOR:0x02000000 at 0x60000000 NOR flash on EDB9307: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x010A CFI interleave: 2, device type: 2 Intel/Sharp Extended Query Table at 0x010A CFI interleave: 2, device type: 2 Intel/Sharp Extended Query Table at 0x010A CFI interleave: 2, device type: 2 Intel/Sharp Extended Query Table at 0x010A CFI interleave: 2, device type: 2 Intel/Sharp Extended Query Table at 0x010A CFI interleave: 2, device type: 2 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in NOR flash on EDB9307 at offset 0x1fc0000 FIS origin: 0x0 10 RedBoot partitions found on MTD device NOR flash on EDB9307 EDB9307-NOR:using detected partition definition Creating 10 MTD partitions on "NOR flash on EDB9307": 0x00000000-0x00040000 : "RedBoot" 0x00040000-0x001c0000 : "zImage" 0x001c0000-0x00340000 : "zImage.new" 0x00340000-0x00940000 : "cramfs" 0x00940000-0x00f40000 : "cramfs.new" 0x00f40000-0x01f40000 : "jffs2.img" 0x01f40000-0x01f80000 : "update_script" 0x01f80000-0x01fc0000 : "unallocated" 0x01fc0000-0x01fff000 : "FIS directory" mtd: partition "FIS directory" doesn't end on an erase block -- force read-only 0x01fff000-0x02000000 : "RedBoot config" mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only usb.c: registered new driver usbdevfs usb.c: registered new driver hub host/usb-ohci.c: USB OHCI at membase 0xff020000, IRQ 56 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. eeprom.o version 2.8.7 (20040611) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.97 (double precision) VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 132K init started: BusyBox v1.1.3 (2008.07.29-19:32+0000) multi-call binary Starting pid 12, console /dev/console: '/etc/rc.sysinit' Starting up... Making ramdisks... ext2fs_check_if_mount: No such file or directory while determining whether /dev/ram0 is mounted. *** Calling usbrestore *** + echo Mount proc and usbdevfs Mount proc and usbdevfs + mount /proc + mount /dev/sda1 /mnt/usbrestore mount: Mounting /dev/sda1 on /mnt/usbrestore failed: No such device or address + sleep 1 + umount -f /mnt/usbrestore umount: forced umount of /mnt/usbrestore failed! + mount -t usbdevfs none /proc/bus/usb + [ 0 -ne 0 ] + echo Checking for USB Restore: Checking for USB Restore: + [ -e /usr/bin/usbrestore ] + /usr/bin/usbrestore Device is a Mini Touchscreen Type 2 Initialize returned false -- Version 1.7.4.1 + VAR=0 + echo umount proc/bus/usb and /proc umount proc/bus/usb and /proc + umount /proc/bus/usb + umount /proc + echo_success + echo -n Success Success+ echo + return 0 *** usbrestore finished *** Starting pid 31, console /dev/console: '/etc/rc.sysinit1' mode: 16386 -o offset: 0 -f frequency: -3200000 maxerror: 16384000 esterror: 16384000 status: 64 ( UNSYNC ) -p timeconstant: 2 precision: 1 tolerance: 33554432 -t tick: 9991 time.tv_sec: 60 time.tv_usec: 406667 return value: 5 (clock not synchronized) Wed May 21 16:19:00 PDT 2008 Loading modules: watchdog zd1211b _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ ZD1211B - version 2.15.0.18-20090113 usb.c: registered new driver zd1211b zd1211_mod _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ zd1211 - version 2.15.0.18-20090113 usb.c: registered new driver zd1211 ip_tables ip_tables: (C) 2000-2002 Netfilter core team ipt_LOG ipt_mark ipt_tcpmss ipt_conntrack ipt_multiport ipt_tos ip_conntrack ip_conntrack version 2.1 (512 buckets, 4096 max) - 160 bytes per conntrack ipt_limit ipt_pkttype iptable_filter ipt_mac ipt_state arptable_filter arp_tables arp_tables: (C) 2002 David S. Miller ybuttons yencoder Using interruptable GPIO to run encoder ydriver ydriver: backlight setup for edb9307 hardware ep93xx-audio stac9758 EP93xx Ac97 audio support initialized (8384-7658). Starting Watchdog timer manager...Watchdog at attention. done. killall: c4server: no process killed ep93xx_eth: Disabled Auto MDIX on ICS Phy TIME OUT: No Ethernet Signal Detected - check the cable dhcpcd[217]: broadcasting DHCP_REQUEST for 10.0.1.10 dhcpcd[217]: Waiting 4000000 usec for a response... killall: c4server: no process killed Starting Control4 Button Watcher Starting Syslog Daemon... Starting Dropbear Server Checking for server keys... Starting Telnet Daemon... No upgrade detected. Checking image parity...detected. All systems go. Checking for jffs2 corruption...clean. Starting upmand: Success Starting Cron Daemon... Starting Dropbear Server Checking for server keys... Starting System Manager...done. mount: Mounting none on /pþ Please press Enter to activate this console.